pda cipherlab
As default the barcode scanner is not activeated
Two computers showed at the base of screen but with cross
(NOte if two computers are not at the bottom of the screen there will be a round orange P symbol. Click it and then select WiFi Power on)
There are arrows on the task bar to the left and right if more in the task bar than can be displayed.
There is an antenna signal giving signal strength at base 94reader icon on the screen is the barcode program Internet explorer is on the desktop Spare battery in back of stand is on charge
On screen left to right at base windows icon bott left screen battery indicator (when in stand) Information icon that does not do anything signal meter network status time keyboard icon application switch
upon double click the barcode icon on desktop opens program three tabs at top general- symbologies - about In general: only tick in barcode reader.. click data output button tick keyboard emulation only auto enter = scan +enter_char auto enter char: = carriage return thats it ! InSymbologies: tick only ean13/upc + ean8 + code128
DblClk ean13/upc
ean 13 / upc/a add on 2
add on 5
isbn conversion
issn conversion
tx ean13 chk digit tick
Convert upc-ean13
tx upca chk digit tick
tx system number tick
enable gtin for ean13
when screen closes barcode icon should be at base left of the information icon mentioned above.
to have the screen go for more than 15seconds: Start > Settings > control panel > display > backlight change 15 seconds to 1 minute + OK
Check Power properties scheem: standard settings..
switch state to user idle after 1 minute
system to idle after 3 minutes
system state suspend after 5min
Connectivity:
Dble click the two computers at the base IDENTIFY & Dble Click THE SSID PICK ENCRYPTION PICK AUTHENTICATION UNTICK KEY IS PROVIDED ENTER KEY INTO KEY INDEX BOX NOW OK AND THE SCREEN WILL DISSAPEAR.....NOW TWO COMPUTERS AT THE BASE HAVE NO CROSS
OPEN INTERNET EXPLORER NOTE: WHILE IE IS OPEN THE SOFTWARE KEYBOARD IS NOT AVAILABLE CLICK THE ORANGE a BUTTON UNDER THE ON OFF BUTTON AND START USING THE NUMBER PAD LIKE A MOBILE PHONE. TO GET FROM ALPHA TO NUMBER AGAIN FOR THE DOTS HIT THE a BUTTON ENTER http://www.PEACHSOFTWARE.COM.AU/DOWNLOADS.HTM - WWW.PEACHSOFTWARE.COM.AU/DOWNLOADS.HTM SCROLL DOWN AND SELECT STOCKTAKE PDA SELECT TO SAVE TO DISK AND OK CLOSE WHEN COMPLETE CLOSE IE OPEN MY DEVICE FROM THE DESKTOP....Open Disc on chipSTOCKPDA SHOULD BE IN THAT SCREEN NOW SELECT & HOLD ........ SELECT COPY FROM THE FLYOUT CLOSE THE SCREEN ON THE DESKTOP PRESS AND HOLD STYLUS ON EMPTY SPACE ON DESKTOP SELECT PASTE SHORTCUT FROM THE FLYOUT SCREEN
OPEN THE STOCKTAKE PROGRAM....WARNING COMES UP SAYS ENTER IP ADDRESS JUST OK TO THAT AND THE SCREEN OPENS UP.
SETUP STOCKPDA AS USUAL.
THE TOP SIDE BOTTONS SEEM TO BE ENTER BUTTONS, THE SIDE BUTTONS UNDER THOSE ARE FOR THE SCANNER.
INITIALLY MY SCANNER DID NOT WORK SO I WENT BACK INTO THE SCANNER OPTIONS AND SET KEYBOARD EMULATION AGAIN AND OK. IT STARTED WORKING PROPERLY AFTER THAT.
|