MOTOROLA MC45 NEW |
Post Reply |
Author | |
Guests
Guest |
Post Options
Thanks(0)
Posted: 24-Apr-2014 at 12:23 |
Changing the Power Settings
To stop the MC45 turning off after a short period of non-use: 1. Tap Start Settings Power icon Advanced tab. 2. Set the turn off value to 5 minutes, or off all together if you prefer. 3. Select ok.
Edited by peach - 24-Apr-2014 at 15:35 |
|
peach
Admin Group THE BOSS Joined: 01-Jan-2006 Status: Offline Points: 1295 |
Post Options
Thanks(0)
|
If the Unit does not start at all then here is the fix. You will need t reload the operating system. Download file from here.... www.peachsoftware.net.au/downloads/pda/reinstalmc45.zip 1. Extract content and copy into SD root
Edited by peach - 18-Mar-2014 at 13:07 |
|
peach
Admin Group THE BOSS Joined: 01-Jan-2006 Status: Offline Points: 1295 |
Post Options
Thanks(0)
|
Resetting the MC45 To perform a cold reset simultaneously press the Power button and the 1 and 9 keys. This will keep the network and PDA settings. www.peachsoftware.net.au/downloads/pda/resetmc45.zip Instruction - Copy the folder to SD card > Insert to MC45 > Open folder and Run StartUpdLdr.exe file. Make sure unit on the Cradle and changing while you run clean boot. Edited by peach - 18-Mar-2014 at 13:05 |
|
Guests
Guest |
Post Options
Thanks(0)
|
If in the Pick Stock screen when an incorrect part is scanned and the in stock QTY box does not change colour to notify you the part is in correct you need too,
In the PDASuite menu screen select the Server tab, remove the Tilde (~) symbol form the box and un-tick the Character Return box
This should fix the problem
(ONLY FOR MOTOROLA PDA'S)
|
|
Guests
Guest |
Post Options
Thanks(0)
|
First you will need to connect it to the internet, highlight the Wireless option from the start menu and select the fusion option from the taskbar at the bottom of the PDA, then select options, change the dropdown to WLAN Management and tick the tick option windows manages WLAN, click save and OK If the PDAsuite is already installed on the PDA you can start from number 4 Below will be instructions on the downloading of the PDA program and connecting it to your server 5. Then click on RUN 12. Enter the IPv4 Address you noted down into the PDA’S IP Address box Once this is done you are ready to go Edited by kylep - 04-Feb-2014 at 12:45 |
|
Guests
Guest |
Post Options
Thanks(0)
|
If the Barcode scanner is not working go to the main menu and click on the program called 'DataWedge' and click on the option called running, this will start up the barcode program When you first take the Motorola PDA of off standby (Idle) it will take about 30 seconds for the PDA to connect back to the WIFI during this time the PDASuite should not be opened as it can cause errors Edited by peach - 29-Jan-2014 at 08:35 |
|
peach
Admin Group THE BOSS Joined: 01-Jan-2006 Status: Offline Points: 1295 |
Post Options
Thanks(0)
|
All notes about the MC45 go here. Customers only starting getting these units in December 2013.
Supplier is SEKTOR 02 9947 1555 for service. Wifi Settings. There are 2 ways to set up the Wifi - 1. Is to create a profile (hard way) or you can turn on "Windows Manages Wifi" Here is how you do this..... Home Screen Select Wifi Select Fusion (button at base of screen) Options WLan management sELECT wINDOWS mANAGAES wlan Save OK Once back at the home screen select the Wifi you would like to connect to Connect to the internet next Authentification = WPA2-PSK Data Encryption = AES Enter the Network Key Next Finish If the device keeps trying to connect but cannot you probably have entered the incorrect network key. So then go back to the list of Wifi Connections and then hold the stylus on and select remove settings and start again.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |