Falcon (Black Unit) |
Post Reply |
Author | |
peach
Admin Group THE BOSS Joined: 01-Jan-2006 Status: Offline Points: 1295 |
Post Options
Thanks(0)
Posted: 21-Aug-2009 at 04:27 |
If during the CabFile extraction the device reports out of memory then goto Start > ControlPanel > System > then slide the pointer towards the Memory side. Then you can proceed to extract the CabFile. Once done then restore the slider back to the program side.
|
|
peach
Admin Group THE BOSS Joined: 01-Jan-2006 Status: Offline Points: 1295 |
Post Options
Thanks(0)
|
Found that the Disc On Chip never gets cleared on a cold reboot.
You need to delete files from inside here yourself. When installing the latest Stcktake PDA V3.1 make sure you follow this routine....
1. Run the existing StockPda and get the setup information
2. Delete shortcut from desktop
3. Delete program from Disk On Chip
4. Goto peachsoftware.com.au/pda.htm and download CAB4.1- save to diskonchiip
5. go into disk on chip and double click the cab file and it will ask for a name just use cab41 and allow it to extract to windows.
6. After the Cab file has extracted it deletes itself from disk on chip
7. Now download the Stock PDA program to disk on chip.
8. Touch and hold stylus on it > Copy > Goto Desktop > PasteShortcut
9. Now set up the database location and server ip
Done
|
|
peach
Admin Group THE BOSS Joined: 01-Jan-2006 Status: Offline Points: 1295 |
Post Options
Thanks(0)
|
psc falcon instructions setup 4220 bottom of screen left to right
windows symbol-program running otherwise empty spot antenna - barcdoe symbol(if running) - Battery indicator- time - keyboard symbol ("a" with a pen through it) - Tab between screens. for cold reset hold button in at back for 10 seconds do alignment Now Barcode Scanner......
Downloading StockPda..... Back at the desktop Other info from the old Q&A notes
Below is the firmware update information for your reference. To confirm the current firmware version of the Falcon 4220 go to: Start > Settings > Control Panel > System. The firmware version is located on the General tab. The firmware version will display as PSC3-xx.EN. (v.3.41 is the current firmware for the Falcon 4220). The firmware and update utility software can be downloaded from the following website:http://au.psc.com/html/downloads.htmThe required downloads are Falcon 4220 English Firmware Release v3.41 (current firmware for 4220) and Firmware Update Utility (FUU) v2.53 (software for updating the firmware). To update the firmware, first establish an ActiveSync connection between the terminal and the PC. On the PC, open the Firmware Update Utility program. In the program, select the connection type from the Communicate using: drop down list. In the Image File: box, select the icon to the far right of the box to browse for the firmware file. The firmware image filename will contain a .bin file extension. Then select Update Terminal. Detailed information on updating the firmware is also found in chapter 4, section 9 of the Falcon 4220 Product Reference Guide (PRG). Edited by peach - 02-May-2008 at 04:07 |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |